Go above and beyond with our extra-wide SWD embroidery machine. With the largest embroidery area in the industry, this 15-needle commercial embroidery machine is perfect for embroidery on large items like bags, jackets and tablecloths, as well as regular items like polos and caps.

High-Definition True-Color 8″LCD Touch Screen

Run your machine with ease with the high-definition true-color 8-inch LCD touch screen panel. With a memory capacity of 20 million stitches, this computerized panel allows you to upload and edit design settings and create customized lettering. You can also transfer designs wirelessly to the panel from the Chroma software included with your machine.

Design Preview Screen

In this small preview screen, you can see the design you’re embroidering and how far along you are in the embroidery process.

Color Sequence Menu

Display and program color sequence settings.

Design Menu

Create on-board letting and import and view designs on the USB and machines memory.

Preset Hoops

Displays and programs the machines preset hoops

Design Settings

Repeat designs and edit settings like size and rotation angle with the design settings menu.

Trace Design Key

Use this key to trace the designs start and end point. This will help you select your designs placement and determine if your needle will come into contact with the hoop at any point during the embroidery process.

Float

Rewind or fast forward your design by stitch count.

Stitch Mode

View the machines status, and rewind or fast forward the design in low or high speeds.

Needle Icon

Manually switch needles with the needle icon. This icon also displays the current needle position and degree settings on the machine. The left side displays the current needle position and the right side displays the degree the machine is aligned to.

Frame Out Key

The frame out key brings your hoop forward during the embroidery process for simple one-step appliqu.

Emergency Stop Button

In case of an emergency, press the emergency stop button located on bottom left side of the panel. This will stop the machine.

100 Degree Key

This key automates the process of aligning the machine to 100 degrees. In order to use the machine, it must be aligned to 100 degrees.

Manual Trimming Key

Use this key to perform trimming during operation status and preparation status.

Start/Stop Button

Use these buttons to start or stop the embroidery process. If you need to stop embroidering at any time during the process, click the Stop button to make the machine stop.